The finish of the rails may be important from an aesthetic point of view and also for the grip surface it provides.Ī polished or chrome finish is attractive and hard wearing but can be quite slippery to hold, especially when hands are wet.Īn epoxy, paint or plastic finish provides a warmer feel to rails, is hard wearing and will reduce the effects of condensation. Wooden rails have metal brackets at each end for attachment to the wall. Plastic rails may be reinforced with a metal core. Rails that can be lifted up and out of the way can be useful for wheelchair users and people who use a hoist. Some of these rails have a built-in toilet roll holder. Some models provide a single horizontal rail which provides support at one height others consist of a looped rail which provides two alternative gripping positions. Some have a support leg which rests down on the floor when the rail is horizontal. They are fixed to the wall or to the floor behind the toilet and can fold down to a horizontal position alongside the toilet. These are most often seen next to toilets. They attach to the walls and can be cut or ordered to the required length.īends and angles can be fitted where required. System rails are rails which can be put together to provide customised support over a large area, e.g. They can be held at any point up the bar for general support and can be useful in the process of standing up/sitting down. The top section provides an angled or upright handhold.Ĭranked or offset rails are wall-fixed rails which have been designed to fit to frames and spaces to allow the user to step up to and through a doorway or space without releasing grip on the rail.įloor to ceiling rails are vertical rails which are attached to both the floor and the ceiling. This enables the user's body weight to be distributed through his or her forearm which may be helpful for someone with painful hands or wrists. The lower portion is usually set horizontally and acts as a forearm support. These are wall-fixed rails with an in-built angle. Pre-formed angled rails and right angled rails Rails set at an incline (fixed at a slight angle to the horizontal) may assist someone with weak or painful arms or wrists to support his/her forearm on the rail whilst pushing up, thus spreading the body weight over a larger area. It is not necessary to lean far forward to grasp the rail at the lower end and the hand can travel up the rail to maintain the support once the person is standing. This keeps the wrist in a neutral position. The rail can be placed at an angle of 45 degrees up and away from the user. Rails set at an angle can help a person who needs a steadying support - e.g. Vertical rails may assist when pulling up into a standing position or for just maintaining balance. Most people find it easier to push down on a rail rather than pull on one, so horizontal rails are more commonly used. Horizontal rails may help when pushing up from sitting and provide support when lowering, e.g. They can be fixed in a horizontal or a vertical position, or at an incline or angle. Straight rails are wall-fixed rails which run in one direction only. The main types are briefly introduced below, before going into greater detail about grab rails and their use in specific areas of the home. The grab bar's large weight capacity makes it a reliable bathtub handle for elderly persons, disabled, or those vulnerable in strength.There are many types of grab rail. Bathtub safety bars provide an excellent support surface for anyone weak in strength. The bathtub handicap bar features protective rubber pads to keep it from damaging any tub. Installing the handicap bathtub rail is quick, painless, and straightforward. Steel spring clamps provide a flexible grip for a tight fit.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |